*The contents of this book are the same as the instruction manual that comes with your purchase.
① Identify the parts
First make sure you have all the parts.
A: Moquette cushion x 1
B: Bottom plate x 1
C/C': Legs x 2
D: Stopper board x 2
② Preparation for assembly
Fold all two parts of the legs [C/C'].
First, fold it to the side without the groove. At that time, slowly lift the edge and gently bend it with a ruler to make a nice bend.
Next, fold it back to the other side (the side with the groove).
③-1 Assembling the legs
Stand the two legs [C/C'] so that their non-grooved sides meet, and insert the stopper plate [D] into the notch at one end.
At this time, insert the stopper until the protruding part is at the same height as the leg.
③-2 Assembling the legs
Fix the opposite side with the stopper plate [D] in the same way.
④ Assembling the moquette cushion
Insert the stopper part of the moquette cushion [A] into the uneven part on the inside of the assembled leg [C/C'].
Place the moquette cushion on the floor and fit it around the legs.
⑤ Fitting the bottom plate
Complete by fitting the bottom plate [B] horizontally to the ground until it is less than 1 cm from the height of the assembled legs [C/C'].